Compressibility Recovery Tester

Compressibility Recovery Tester
Compressibility Recovery Tester
Product Code : 45
265000 INR
Price And Quantity
Minimum Order Quantity :
1
Unit of Measure :
Piece/Pieces
Price :
265000 INR
Product Description

Compressibility and Recovery Tester is particularly built and created for gasket materials. There is an iron block, which is a solidified and ground base for retaining the sample. In the analyzer, there are incorporated an arrangement of metal penetrators in round shape of determined shape and sizes according to the way of material to be examined. On the iron block, there are affixed double dials for computing the breadth of test example at the season of preloading also complete pressure. These double dials are given so that the precise breadth can be computed by taking the mean value. Further, in our inspecting device, preload incorporate the load of the penetrator as well as different weights to provide the value determined in ± 1%.

Technical specifications

  • Pressure cell: 1500 N

  • Automation dials: 0 to 10 mm X 0.001 mm minimum count

  • Energy requirements: 500 W, 220 VAC one phases

  • Engine: ½ hp 3 phase induction engine

Below are the various configurations on the regulation board for arranging of load conditions:

  • Mode 1: pre-stack 22.2 N and sum load 1112 N

  • Mode 2: pre-stack 4.4 N and sum load 222 N

  • Mode 3: pre-stack 4.4 N and sum load 445 N

  • Mode 4: pre-stack 4.4 N and sum load 356 N

Discretionary extra

Exceptional programming is introduced in the load screen that shows to take note of the dial meter reading via a alarm only following usage of preload and significant load for a predetermined time period.

Operation

The development of the penetrator is performed with manual configuration or mechanical configuration. For its development, manual configuration is utilized whereas for inspecting, mechanical configuration is utilized. In auto configuration, alter the penetrator and pick the configuration simply following turning off the computerized screen and after that again turn it on the automation screen. For down and up movement in manual configuration, initially press the rotational switch. Finally for the checking, press the push following retaining the examine sample on the iron block to inspect switch.

Characteristics:

  • Every part is powder coated, chrome plated or painted

  • Rust resistance

  • Distinctive configurations for setting of pressure conditions

  • Great level of precision

  • In consistence with ASTM F 36 norms

Utilization:

  • Gasket materials in motor vehicle business


RELATED STANDARDS:

ASTM F 36


Compressibility and Recovery Tester is particularly built and created for gasket materials. There is an iron block, which is a solidified and ground base for retaining the sample. In the analyzer, there are incorporated an arrangement of metal penetrators in round shape of determined shape and sizes according to the way of material to be examined. On the iron block, there are affixed double dials for computing the breadth of test example at the season of preloading also complete pressure. These double dials are given so that the precise breadth can be computed by taking the mean value. Further, in our inspecting device, preload incorporate the load of the penetrator as well as different weights to provide the value determined in ± 1%.

Technical specifications

  • Pressure cell: 1500 N

  • Automation dials: 0 to 10 mm X 0.001 mm minimum count

  • Energy requirements: 500 W, 220 VAC one phases

  • Engine: ½ hp 3 phase induction engine

Below are the various configurations on the regulation board for arranging of load conditions:

  • Mode 1: pre-stack 22.2 N and sum load 1112 N

  • Mode 2: pre-stack 4.4 N and sum load 222 N

  • Mode 3: pre-stack 4.4 N and sum load 445 N

  • Mode 4: pre-stack 4.4 N and sum load 356 N

Discretionary extra

Exceptional programming is introduced in the load screen that shows to take note of the dial meter reading via a alarm only following usage of preload and significant load for a predetermined time period.

Operation

The development of the penetrator is performed with manual configuration or mechanical configuration. For its development, manual configuration is utilized whereas for inspecting, mechanical configuration is utilized. In auto configuration, alter the penetrator and pick the configuration simply following turning off the computerized screen and after that again turn it on the automation screen. For down and up movement in manual configuration, initially press the rotational switch. Finally for the checking, press the push following retaining the examine sample on the iron block to inspect switch.

Characteristics:

  • Every part is powder coated, chrome plated or painted

  • Rust resistance

  • Distinctive configurations for setting of pressure conditions

  • Great level of precision

  • In consistence with ASTM F 36 norms

Utilization:

  • Gasket materials in motor vehicle business


RELATED STANDARDS:

ASTM F 36


Contact Us

Factory Office: F-23, MGR UPSIDC Indl. Area, Hapur, Uttar Pradesh, 201015, India
Phone :+917259320847